Redmi Note 14 Pro+ 5G Flash File (Stock ROM)

The Redmi Note 14 Pro+ 5G flash file helps users upgrade, downgrade, or restore your device to its original state and fix software issues like Bootloop, IMEI, or Dead Boot on your device. I’ve shared a quick guide on how to download and install the Redmi Note 14 Pro+ 5G flash file on your device.

About Redmi Note 14 Pro+ 5G

The Redmi Note 14 Pro+ 5G is powered by the latest Qualcomm SM7635 Snapdragon 7s Gen 3 (4 nm) 5G chipset. It comes with 12GB and 16GB of RAM. The phone is equipped with a 6200mAh non-removable battery and supports 90W fast charging. Running on HyperOS based on Android 14, it offers storage options of 256GB and 512GB but does not include a dedicated SD card slot for expandable storage.

How to Flash Redmi Note 14 Pro+ 5G Firmware

Note: You need authorized login credentials to access the flash tool to install firmware file on your device.

  1. Download and install the official USB Drivers. (skip if already installed)
  2. Download the Redmi Note 14 Pro+ 5G firmware from the above links.
  3. Extract downloaded firmware files on your computer.
  4. Open the Mi-Flash-tool and load the firmware.
  5. Connect the phone to computer via USB cable.
  6. Click on the start button to begin the flashing process.
  7. wait for the flashing process to complete. Your device will restart once the flashing process is complete.
  8. Now setup your device and login your google Account (if required).
  9. If you backed up your data before flashing, now’s the time to restore it.
  10. Done, enjoy.

Please check the Fastboot Firmware File suffix must be tgz. If it is .gz, Please Rename it from .gz to .tgz for flash file extraction.

Connection methods

  1. BROM or Preloader Mode: If you have MediaTek Device, Power off your device, hold the volume up and down keys, and connect the USB cable.
  2. EDL Mode: If you hav a Qualcomm Phone, Power off your device, Connect usb cable by holding the both volume up and down keys. Some Devices need to Short Teset Point to boot EDL mode.
  3. Fastboot mode: If you are using Fastboot Rom, Turn off your device and boot it into fastboot mode by holding the Power and Volume Down buttons at the same time. Use a USB cable to connect your device to your computer.

Important Note:

  • Backup Your Data: Flashing will erase everything on your phone, so make sure to back up important files before proceeding.
  • Firmware: Using the wrong firmware can brick your device. Double-check that you have the correct version for your model.
  • Charge Your Phone: Ensure your device has at least 50% battery life to avoid any interruptions during flashing.
  • Be Patient: The flashing process can take time. Do not disconnect your device until the process is fully completed.

Common Troubleshooting

  • If your device is not recognized by the computer, please reinstall the USB driver and change the COM Port.
  • Use a good quality USB cable for better connectivity and faster data transfer.
  • If flashing fails, retry the process and follow the steps carefully.
  • If your device gets stuck at the boot screen, try performing a factory reset or re-flashing the device with a different flash file.

Leave a Comment