Redmi A4 5G Flash File (Stock ROM)

Download Redmi A4 5G Flash File Stock ROM from GsmMafias. This firmware is based on Miui and used for unlock patterns, passwords, FRP locks, etc. It is also useful for flashing to fix common problems, like hang on logo, stuck in fastboot mode, brick after OTA software update, or auto boot recovery mode, and other software-related issues. I’ve shared an easy-to-follow guide for downloading and flashing the stock Rom to fix these issues on Redmi A4 5G.

Download Redmi A4 5G Flash File Firmware

• warm_in_global_images_OS1.0.4.0.UGVINXM_20241106.0000.00_14.0 (India)
• Xiaomi Mi Flash Tool
• USB Drivers

Redmi A4 5G Specifications

The Redmi A4 5G is powered by the Qualcomm SM4635 Snapdragon 4s Gen 2 (4 nm) chipset, with 4GB of RAM. It features a 5160mAh non-removable battery with 18W fast charging. Running on HyperOS based on Android 14, it offers 64GB or 128GB of internal storage but does not include a dedicated SD card slot for storage expansion.

Specs source: gsmarena.com
Disclaimer: We cannot guarantee that the specifications information on this page is 100% correct.

Benefits of Redmi A4 5G Stock ROM:

• Stuck on the logo screen.
• Restart on boot logo.
• FRP lock (Factory Reset Protection).
• Fastboot mode errors.
• Blank or white display after flashing.
• Auto boot in recovery mode.
• Bricked devices after improper flashing.

How to Flash Redmi A4 5G Using the Flash File and Tool

1. Download the Redmi A4 5G flash file and flash tool from the provided links.
2. Download and install the latest USB drivers on your computer. (skip if already installed)
3. Extract the downloaded firmware and flash tool files using 7-zip or WinRAR.
4. Move the flash file folder to your desktop for easy access (recommended).
5. Launch the flash tool and select the flash file within the tool.
6. Put your device into EDL mode by shorting the EDL points and connect it to your PC using a USB cable.
7. Click the Refresh button in the tool to detect your connected device.
8. Press the Flash button and wait for the process to complete.
9. Once the flashing is done, disconnect your device.
10. All done!

Note: If the device does not enter EDL or BROM mode, you may need to use the test point method (short specific hardware pins on the device) to force the device to boot mode.

Note: You need authorized login credentials to access the Flash tool to install the firmware file on your device.

Please check the Fastboot Firmware File suffix must be tgz. If it is .gz, please rename it from .gz to .tgz for flash file extraction.

Disclaimer: Flashing your device will erase all data, so be sure to back up anything important. Use the correct firmware for your model to avoid damaging your device. Ensure your phone is charged to at least 50% to prevent issues during the process, and be patient—don’t disconnect your device until flashing is fully finished.