The Realme P1 Speed Edition RMX5004 flash file allows you to remove password locks, bypass FRP (Google account lock), and upgrade or restore your device to its original state. It also resolves software issues like being stuck on the restart logo, touch problems, black screens, fastboot mode, and even dead boot. I’ve shared an easy-to-follow guide for downloading and flashing the stock Rom to fix these issues.
Download Realme P1 Speed Edition Firmware
- RMX5004export_11_14.1.0.410(SP04EX01)_2024091300450000
- OPLUS Flash Tool (Oppo/Realme/Oneplus)
- USB Drivers
About Realme P1 Speed Edition
The Realme P1 Speed Edition is powered by the MediaTek Dimensity 7300 Energy (4 nm) chipset, available with 8GB or 12GB of RAM. It has a 5000mAh non-removable battery with 45W fast charging. Running on Realme UI 5.0 based on Android 14, it includes 128GB or 256GB of internal storage, but does not have a dedicated SD card slot for storage expansion.
Specs source: gsmarena.com
Disclaimer: We can not guarantee that the Specifications information on this page is 100% correct.
How to Flash Realme P1 Speed Edition Firmware
- Download and install the latest USB Drivers on your computer. (skip if already installed)
- Download the required Realme P1 Speed Edition firmware version from the above links.
- Extract downloaded firmware files on desktop.
- Open the Oplus-Flash-tool and select the firmware folder or images.
- Power off and Connect the phone to computer via USB cable.
- Click on the start button to begin the flashing process.
- wait for the flashing process to complete. Your device will restart once the flashing process is complete.
- Now setup your device and login your google Account (if required).
- If you backed up your data before flashing, now’s the time to restore it.
- Done, enjoy.
How to Connect the Device (3 Methods)
- BROM or Preloader Mode: If you have MediaTek Device, Power off your device, hold the volume up and down keys, and connect the USB cable.
- EDL Mode: If you have a Qualcomm phone, power off your device and connect the USB cable by holding the volume up and down keys. Some devices need to Short Test Point to force EDL mode.
- Fastboot mode: If you are using Fastboot Rom, turn off your device and hold the Power and Volume Down buttons at the same time for fastboot mode. Use a USB cable to connect your device to your computer.
Note: You need authorized login credentials to access the flash tool to install the firmware file on your device.
Disclaimer: Flashing your device will erase all data, so be sure to back up anything important. Use the correct firmware for your model to avoid damaging your device. Ensure your phone is charged to at least 50% to prevent issues during the process, and be patient—don’t disconnect your device until flashing is fully finished.
