The Realme 13 Pro+ RMX3921 Firmware Flash File is now available to download from GSMmafia. It helps you fix software issues such as logo Stuck, Screen Password reset, FRP Google Account lock removal, etc. Here, you’ll find the direct links to download the official Firmware Stock ROM (Flash File), along with a simple step-by-step guide for installation.
What is a Realme Flash File?
A flash file, also known as firmware or Stock ROM, is the software that runs on your device’s hardware. You can use Flash files to update, downgrade, or reinstall the operating system, and fix many software-related issues on your Realme 12 mobile devices.
Benefits of using Realme 13 Pro+ Firmware
- Remove screen locks (Pattern, PIN, Password)
- Restore to factory settings
- Remove FRP Lock (Google Account)
- Fix hang on logo
- Fix bootloop or restart
- Unbrick a bricked device
- Dead boot repair
- Fix software bugs
Realme 13 Pro+ Specs
Specs source: gsmarena.com
Disclaimer: We can not guarantee that the Specs information on this page is 100% correct.
How to Check Oppo/Relame Model:
- First Go to Emergency Call.
- In Dialer Enter *#899#.
- Next, Go to Software Version.
- Check the Model and Software Version of the current Device Running.
Download Realme 13 Pro+ Firmware (Stock ROM)
How to Flash Realme 13 Pro+ Stock ROM
Note: You need authorized login credentials to access the Flash Tool to flash Firmware File on the Device.
- Download and install the USB Drivers. (skip if already installed)
- Download the required flash file version from the above inks.
- Extract the firmware using WinRAR or 7Zip.
- Open the flash_tool.exe.
- Load the Firmware on the flash tool.
- Click the Download button.
- Turn off your phone completely.
- Press and hold both the Volume Up and Volume Down buttons, then connect the phone to your PC using a USB cable.
- Once the phone is detected in the tool, flashing will start.
- You will see a flashing bar indicating the flashing process.
- wait for the flashing process to complete. (it usually takes 5-10min)
- Once done, you see a Download success message. (see below image)
- Unplug and Power on your Device. enjoy.
Important Note:
- Backup Your Data: Flashing will erase all data on your device. Make sure to back up important files before proceeding.
- Firmware: Using the wrong firmware can brick your device. Double-check that you have the correct version for your model.
- Be Patient: The flashing process can take time. Do not disconnect your device until the process is fully completed.
Troubleshooting Tips
- If your device is not recognized by the computer, please reinstall the USB driver and change the COM Port.
- Use a good quality USB cable for better connectivity and faster data transfer.
- If flashing fails, retry the process and follow the steps carefully.
I hope by following our guide you have successfully flashed your device and restored it to working condition. If you have any questions let me know in the comments.