Monday, October 14, 2024
HomeFlash FileRealme 13 Pro 5G RMX3988 Flash File (Stock ROM)

Realme 13 Pro 5G RMX3988 Flash File (Stock ROM)

The Realme 13 Pro 5G RMX3988 Flash File helps you upgrade, downgrade or reinstall Firmware Stock ROM and fix Software Issues like Bootloop, IMEI, or Dead Boot on your device.

In this article, we’ll guide you through everything you need to know about downloading and using the Realme flash file.

Realme 13 Pro 5G Specs

The Realme 13 Pro 5G is powered by the latest Qualcomm SM7435-AB Snapdragon 7s Gen 2 (4 nm) chipset. It comes with 8GB or 12GB of RAM and features a 5200mAh non-removable battery with 45W fast charging. Running on Realme UI 5.0 based on Android 14, it offers storage options of 128GB, 256GB, and 512GB, but lacks a dedicated SD card slot for expanding storage.

Specs source: gsmarena.com
Disclaimer: We can not guarantee that the Specs information on this page is 100% correct
.

How to Check Oppo/Relame Model:

  • First Go to Emergency Call.
  • In Dialer Enter *#899#.
  • Next, Go to Software Version.
  • Check the Model and Software Version of the current Device Running.

How To Flash Realme 13 Pro 5G Firmware File:

Note: You need authorized login credentials to access the Flash Tool to install Firmware File on your device.

  • Download and install the USB Drivers. (skip if already installed)
  • Download the required flash file version from the above inks.
  • Extract the firmware using WinRAR or 7Zip.
  • Open the oplus-flash-tool.exe.
  • Load the Firmware on the flash tool.
  • Click the Download button.
  • Turn off your phone completely.
  • Press and hold both the Volume Up and Volume Down buttons, then connect the phone to your PC using a USB cable.
  • Once the phone is detected in the tool, flashing will start.
  • You will see a flashing bar indicating the flashing process.
  • wait for the flashing process to complete. (it usually takes 5-10min)
  • Once done, you see a Download success message.
  • Unplug and Power on your Device. enjoy.

Important Note:

  • Backup Your Data: Flashing will erase all data on your device. Make sure to back up important files before proceeding.
  • Firmware: Using the wrong firmware can brick your device. Double-check that you have the correct version for your model.
  • Be Patient: The flashing process can take time. Do not disconnect your device until the process is fully completed.

Common Troubleshooting Tips

  • If your device is not recognized by the computer, please reinstall the USB driver and change the COM Port.
  • Use a good quality USB cable for better connectivity and faster data transfer.
  • If flashing fails, retry the process and follow the steps carefully.
  • If your device gets stuck at the boot screen, try performing a factory reset or re-flashing the device with different flash file.

I hope by following our guide you have successfully flashed your device and restored it to working condition. If you still have any questions, you can share them in the comment section.

gsmmafia team
gsmmafia teamhttp://gsmmafias.com
GSMMAFIA Team shares Tested Firmware, Flash Tools and USB Drivers for All major Brands. The Team share engaging Android Tips tricks for unlocking guides and valuable content in my free time with some popcorns.
RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Most Popular