Flashing your OnePlus Nord 4 CPH2663 can be an effective way to fix software problems, restore your device to its original state, or even revive a bricked phone. If you’re new to the process or need a refresher, this guide will walk you through everything you need to know about downloading and flashing the stock ROM for your OnePlus Nord 4.
OnePlus Nord 4 Firmware Download
- CPH2663GDPR_11_14.1.0.330EX01_2024072916260104
- OPLUS Flash Tool (Oppo/Realme/Oneplus)
- USB Drivers
About OnePlus Nord 4
The OnePlus Nord 4 is powered by the latest Qualcomm SM7675 Snapdragon 7+ Gen 3 (4 nm) chipset. It comes with options for 8GB, 12GB, and 16GB of RAM. The device features a 5500mAh non-removable battery with 100W fast charging. Running on Oxygen OS 14.1, based on Android 14, the OnePlus Nord 4 offers 128GB, 256GB, and 512GB of built-in storage. However, it does not have a dedicated SD card slot for expanding storage.
How to Install Firmware Stock ROM on OnePlus Nord 4
Here’s a simple step-by-step guide to help you flash your OnePlus Nord 4:
- Download: Download the latest firmware from the above links or from the official Oneplus website.
- Choose the Right Version: Ensure you’re downloading the correct firmware version matching your device’s model.
- Extract the Files: Once downloaded, extract the firmware files on your computer.
- Driver: Download and install the official USB Drivers. (skip if already installed)
- Launch Flash Tool: Open the Oplus flashing software and locate the firmware file folder you extracted earlier.
- Connect: Power off your device, hold the volume up and down keys, and connect the USB cable.
- Connect Fastboot: If you are using Fastboot ROM, Turn off your device and boot it into fastboot mode by holding the Power and Volume Down buttons at the same time. Use a USB cable to connect your device to your computer.
- Start Flashing: Click on the start button to begin the flashing process. Do not disconnect your device during this time.
- Reboot Your Device: Your device will restart once the flashing process is complete.
- Initial Setup: Go through the setup process, just like you did when you first got your phone.
- Restore Your Data: If you backed up your data before flashing, now’s the time to restore it.
Note: You need authorized login credentials to access the Flash Tool to install the OnePlus Nord 4 firmware file on your device.
Please check the Fastboot Firmware File suffix must be tgz. If it is .gz, Please Rename it from .gz to .tgz for flash file extraction.
Note:
- Backup Your Data: Flashing will erase everything on your phone, so make sure to back up important files before proceeding.
- Firmware: Using the wrong firmware can brick your device. Double-check that you have the correct version for your model.
- Charge Your Phone: Ensure your device has at least 50% battery life to avoid any interruptions during flashing.
- Be Patient: The flashing process can take time. Do not disconnect your device until the process is fully completed.
Common Errors and their fixes
- If your device is not recognized by the computer, please reinstall the USB driver and change the COM Port.
- Use a good quality USB cable for better connectivity and faster data transfer.
- If flashing fails, retry the process and follow the steps carefully.
- If your device gets stuck at the boot screen, try performing a factory reset or re-flashing the device with a different flash file.
I hope by following our guide you have successfully flashed your device and restored it to working condition. If you still have any questions, you can share them in the comment section.
