Vivo Y90 PD1917F

Download the official Vivo Y90 PD1917F firmware based on RealmeUI. This Stock Rom helps you fix Dead Boot Repair, Restart issue, Hang on logo, FRP Erase, Password Unlock, Software Update or downgrade, and much more.

On this page, I have shared download links for the firmware file and flash tool and provided a step-by-step guide for installing the stock Rom on your phone.

Firmware & Stock ROM Download Tips

Before downloading firmware, please check the model and firmware verision is matched. Other wise, it will harm the device and make completely dead.

•     Option 1 – Check device information in normal mode: Setting -> About -> Software information
•    Option 2 – Reboot to Recovery Mode, Tap Not Rooted Option 3 times, then select Log History, Open log and check Software Information

Download Vivo Y90 PD1917F Flash File:

• PD1917F_EX_A_1.71.9_vivo_mtk (Tested Flash File)
• PD1917F_EX_A_1.71.8_vivo_mtk — Google Drive Link
• MediaTek Driver
• SP Flash Tool

How to Flash or Install Firmware on Vivo Y90

By following the below method, you can retore your device and also clear the user locks, such as Fingerprint, Face Lock, Pattern, PIN, Password, and Google Account FRP Lock.

1. Download and install the USB Driver on your Windows PC. (skip if already installed).
2. Download the Vivo Y90 PD1917F firmware from above links or by searching on Google.
3. Extract the firmware file using WinRar or 7zip .
4. Open Flash.exe to launch the tool.
5. Click Browse and loacte the extracted firmware file.
6. Click Start button, then click Confirm to begin the flashing.
7. Power off your phone, Press and hold Vol Up+Down to enter Download mode.
8. Connect your phone to the PC via USB.
9. Wait for the Flashing Completed message.
10. Once done, Close the flash tool, disconnect your device, and restart it.

Note: If the device does not enter EDL or BROM mode, you may need to use the test point method (short specific hardware pins on the device) to force the device to boot mode.